Gold and Silver Maple Leafs Get New Packaging

Gold Maple Leafs and Silver Maple Leafs are receiving packaging makeovers, changes clearly mandated by investor disfavor with packaging that the Royal Canadian Mint has used since the coins were introduced. Gold Maple Leafs debuted in 1979, Silver Maple Leafs in 1988. The changes appear to be good moves, which should increase sales of Silver Maple Leafs and help keep Gold Maple Leafs the preferred pure (.9999 fine) gold bullion coins.

Since inception, 1-oz Gold Maple Leafs have been packaged ten to a tube. Because Maple Leafs are 24-karat, pure gold, they are "soft," relative to alloyed gold coins, such as American Gold Eagles and Krugerrands. Further, because of the design of the coins and the tight-fitting tubes, it is difficult to remove, inspect, and reinsert 1-oz Gold Maple Leafs in their tubes without scratching the coins.

Actually, reinserting Gold Maple Leafs without at least some scratching is nearly impossible. Further, if the persons inspecting the coins do not know how easily the Gold Maple Leafs are damaged, needless damage often occurs while the coins are out their tubes.

Gold Maple Leafs carry the image of Queen Elizabeth II on the front, with a flat, clear field alongside the image. The backs have the outline of a maple leaf, hence the coins' names. The problem arises from the coins' really sharp milled (reeded) edges. When the coins are reinserted in their tubes, the milled edges often scratch the fields.

Then there is the problem with investors who like to "heft" their coins "to get a feel of them." If they put four or five Gold Maple Leafs in the palms of their hands and "clang" them, the damage can be quite severe. Should a Gold Maple Leaf be dropped, rim damage is almost guaranteed.

As Gold Maple Leafs have been sold into the secondary market, damaged coins have become such a problem that Gold Maple Leafs have lost popularity with investors. The problem has become so widespread that many wholesalers bid only "melt" for Gold Maple Leafs, regardless of their condition. By paying only "melt," wholesalers can profitably resell the coins for industrial or jewelry purposes if no buyers are found for the coins.

Gold Maple Leafs, like the Gold Eagles and the Krugerrands, are bullion coins, which trade for the value of their gold content, plus small premiums. Damaged Gold Maple Leafs do not mean a loss of gold; they contain an ounce of gold regardless of the scratching or rim nicks. Still, buyers do not like to receive damaged coins. This means that Gold Maple Leafs sold into the secondary market have to be evaluated for the degree of damage.

Some wholesalers refuse to take the time to individually inspect Gold Maple Leafs and separate them according to their condition. These are the wholesalers who generally will pay only "melt" for 1-oz Gold Maple Leafs, regardless of condition. Fortunately, the free market being what it is, there are still some wholesalers who will buy according to condition.

Yet the handwriting is on the wall: 1-oz Gold Maple Leafs in tubes will continue to lose popularity and probably will join Krugerrands, Mexican 50 Pesos, and Austrian 100 Coronas as basic bullion coins, which carry the smallest premiums in the bullion coin market. Still, the packaging makeover should fillip sales of new Gold Maple Leafs.

With the new packaging, each 1-oz Gold Maple Leaf will be encapsulated in plastic and suspended in the middle of a plastic card, somewhat as 1-oz gold bars are packaged. However, the plastic protecting the Gold Maple Leafs will be heavier and more durable than the plastic used with 1-oz gold bars. The new packaging should keep the coins from being easily damaged.

With the new packaging, the Royal Canadian Mint made another big change: 1-oz Gold Maple Leafs will now come 25 to a box, whereas the old packaging is ten to a tube. This change could further increase sales as 20 coins are common ordering units for gold bullion coins, because the world's most popular gold bullion coins—American Gold Eagles—come 20 to a tube. As a result of the change, investors wanting "complete original packaging" will move up to 25 ounces.

However, orders for small quantities mean the coins will have to be removed from their mint boxes—but still individually encapsulated—and put in other containers. The new packaging also will require more storage space for Gold Maple Leafs than for 1-oz gold coins that come in tubes.

Although 1-oz Gold Maple Leafs will be a little more cumbersome to handle, a large segment of the gold coin bullion market prefers pure gold coins. Gold Maple Leafs have long been the most popular 1-oz pure (.9999 fine or 24-karat) gold bullion coins on the market, and the new packaging should keep Gold Maple Leafs as the preferred 24-karat gold bullion coins. (The market for pure gold bullion coins is estimated to $2.4 billion annually.) The new packaging is expected to debut sometime in August.

New packaging for 1-oz Silver Maple Leafs has already been introduced. However, Silver Maple Leafs in their old packaging are still available. Since Silver Maple Leafs were introduced in 1988, they have been packaged twenty coins to a sheet, 200 coins in a box. Each coin was individually enclosed in plastic. The new packaging will be similar to the U.S. Mint's Silver Eagles packaging.

Silver Maple Leafs will now come 20 to a tube, 25 tubes to a container, and 500 coins to a "mint box." The new box will be made of durable heavy plastic, whereas the boxes of 200 are cardboard. The new packaging should make Silver Maple Leafs more competitive with American Silver Eagles, presently the most popular 1-oz modern silver bullion coins being sold.

Bill Haynes heads CMI Gold & Silver Inc, one of America's oldest precious metals dealers. See CMIGS' website at http://www.cmi-gold-silver.com

Related Articles:
JellyBasket order Palmalito guava jelly by the case or gift basket!
Palmetto Canning Co., Inc. - Contract Packaging in glass or plastic for sauces, marinades, and other food products
CareMetix, Inc. - Contract Packaging for tube filling, form fill and seal, wet or dry chemical products including polyvinyl packaging.

Revolutionary Green Dispensing Technology Reduces Shipping and Packaging Costs for Condiments and Gel Consistency Products
Turnout Products Inc. is pleased to introduce a new "green" dispensing technology, which will revolutionize the food and detergent industries. The Turnout dispenser significantly reduces shipping, storage and packaging costs associated with condiments and gels, while offering consumers convenience and ease of use.

Filling the Niche for Small Businesses in Need of Integrated Customer Relationship Management Solution
Active CRM™ is the first fully integrated CRM tool for small businesses looking to be successful in today's marketplace

Salazar Packaging Resources, Inc. Receives MBE Certification
Packaging distribution firm enhances value to diversity-focused clients by securing Minority Business Enterprise (MBE) status. With headquarters in the Chicago area, Salazar Packaging Resources automates and streamlines high speed packaging and shipping operations for a wide variety of industries.

Packing Material Thats Cheap!
Shipping materials can be expensive! Even the styrofoam "peanuts" can cost a great deal. Here's a great idea for packing paterial that is bio-digradable, easy, and best of all.

"Spiritual Water" Makes a Big Splash at International Food and Beverage Show Debut
New product attracts not only investors and distributors but also newspapers and television stations.

The end of an Era: Auction of Potato Chips Processing Lines and Packaging Machinery from Jays Foods on January 24
Exactly a week from today, 80 years of potato chip manufacturing on Chicago's south side will come to a close with the public auction sale of equipment from Jays Foods manufacturing headquarters on East 99th Street. The equipment auctioned includes four potato chips processing lines, kettle chip fryers and packaging machinery.

World Blister and Other High Visibility Packaging Market to Reach US$36.6 Billion by 2010, According to New Report by Global Industry Analysts, Inc.
Driven by the growing sophistication of packaging needs in key end-use industries, the world blister and other high visibility packaging market is projected to reach US$36.6 billion by the year 2010. The need for user-friendly, flexible, interactive, and environmentally friendly packaging solutions, is throwing the spotlight on blister packaging. The food and the pharmaceutical industry in particular, are expected to prop up growth in this market in the upcoming years.

Packing Made Easy
Packing is more than just shoving everything you own onto a truck and hitting the road. While I don't believe you necessarily have to hire a professional for a successful move, you do need to know what you are doing before you start loading all of your belongings into boxes.

Summit Publishing Company Announces Greener Package Website and Sustainable Packaging Awards Competition
The publishers of Packaging World announce the 2008 launch of GreenerPackage.com, a sustainable packaging Website, and a companion competition, the Greener Package Awards.

Superior Packaging Equipment Supply For Your Vigorous Marketing And Cost Efficiency
Packaging is an integral part of product marketing and promotion. However packaging equipment is employed to bring about a special packaging and design evaluation that helps in aggressive promotion of your products. Hence all the designs, colours, attractive features, etc come from superior packaging equipment. The branding and marketing takes place through the product presentation and design. Product packaging equipment, stretch wrappers, shrink wrappers, labeling systems and cushioning equipment act as backstage players.